Reducer motor is one of the important mechanical equipment in industrial production and agricultural production and processing. In the production and processing of K47 gear reducer, the phenomenon of burning of gear reducer motor is sometimes caused by the transmission system. In addition to the necessary protective measures, the following six small methods are also effective.

First move: observe and listen frequently, and stand by immediately when smelling peculiar smell. Observe the vibration, noise and abnormal smell of gear reducer. During the operation of the motor reducer, especially the motor reducer with high output power, it is necessary to frequently check whether the anchor bolts, rolling bearing end cover and roller bearing rotating cover of the motor reducer are loose, and whether the grounding protection is reliable. If it is found that the vibration of the motor reducer increases, the noise expands and there is a peculiar smell, try to stand by as soon as possible, find out the causes, and check the common faults.

The second move: keep the shaft mounted gear reducer clean. During the operation of motor reducer, if dust, water stains and other debris enter into its interior, it will cause short circuit fault. Common fault chemicals can damage power line insulating sleeve, cause common fault of inter turn short circuit fault, expand the total electric flow, and damage motor reducer due to temperature rise. Therefore, dust, water stains and other debris should be prevented from entering the interior of the motor reducer. In addition, the exterior of the motor reducer should be kept clean regularly. There is no need for dust and other debris in the heat pipe radiator ribs of the motor reducer, so as to ensure the continuous growth of the heat pipe radiator of the motor reducer.

The third move: to maintain and repair the control equipment of the reduction motor, to ensure that all of its normal work. The professional status of motor reducer control equipment plays an overall role in the normal start of motor reducer. Therefore, the control equipment of motor reducer should be built in the position of drying, air circulation and beneficial to the operation process, and timely dust removal. Frequently check whether the point contact of DC contactor, magnet coil, transformer coil, and wiring screws are reliable, and whether the posture of industrial equipment is flexible, so as to maintain its professional condition for a long time, so as to ensure that the motor reducer can work perfectly without being damaged. Light control reducer motor production and sale of a variety of reducer motor, AC motor, reducer these, warmly welcome to call anytime and anywhere!