通用banner
Your current location: Home >> News >> Industry information

Let planetary gear reducer manufacturers teach you how to maintain gear reducer

2020-11-26 H:40:47
second

After the original factory of gear reducer, it is generally stipulated that there is a running in period of about 200 hours (if the time exceeds, try to change the oil as much as possible). Gear reducer is the key factor of motor machinery and equipment. It's very important to improve the bearing capacity and service life of gear reducer. So, when we use gear reducer in the operation process, we must know how to improve the service life of gear reducer?

1. After the reducer is selected, add lubricating grease to the pinion motor, and install it on the ground. Use the height ruler to accurately measure and adjust the center height width ratio of each test instrument and reducer. After they are in the same center height width ratio, they are fixed with anchor screw and sealing gasket, and small load is added for running in test run. After running for a period of time, domestic gear reducer manufacturers pour lubricating grease into the oil, check whether there is metal powder in the oil, and remove it again,

2. Add lubricating grease and run again until no metal powder is found.

3. Add the grease tightness again and start to lift the load for test. Cylindrical gear reducer manufacturers began to use, advanced test run is essential. Many customers generally ignore this preliminary work, which eventually leads to poor operation of the reducer or damage of the reducer, so as to improve the cost allocation. Therefore, our trial operation of the gear reducer is beneficial for customers to control the capital allocation of the cost, so as to further improve the service life and quality of the reducer.

让行星齿轮减速机厂家教你如何保养维护保养齿轮减速机

Label