Hypoid gear reducer how to choose a good planetary reducer, be sure to look at the planetary reducer shaft. Planetary reducer and coupling are fixed by motor. Xiaobian will introduce the function and information of planetary reducer coupling to you in detail. There are many kinds of couplings used in planetary reducer, such as cross shaft, ball cage, ball fork, bump, ball pin, ball joint, ball gear pump, three needle type, three claw type and three claw type. Spherical, door hinge type, etc. The most common species is abscissa type, followed by longlilong. The common characteristic of planetary reducer coupling is that it has a large amount of compensation, not the same structure. The angle between the two center lines of the shape coupling is different, and the middle is generally lower than 5-45 degrees.

The coupling of planetary gear reducer manufacturers uses its structural characteristics, so that the two shafts do not have the same center line, and the two shafts connected rotate continuously under the condition of the included angle of the center line, and the transmission is reliable. Torque and adaptability are improved. The main features of the coupling are large working capacity, compact structure and high efficiency of transmission device. In fact, according to the torque transmitted, it can be divided into overload, medium level, small, light and medium. A mechanical component used to connect two shafts (driving shaft and driven shaft) in different mechanisms and rotate each other to transfer torque. In the constant speed and load transmission devices, some couplings also have the functions of buffering, damping and improving the daily output power of the shafting. The coupling consists of two parts, each connected to the drive shaft and the driven shaft. Most of the general power equipment is connected with the working equipment according to the coupling.